5802784831 WATER PUMP
5802784831 WATER PUMP
Hurry up, only 1 item left in stock.
Stock por almacén
IVECO WATER PUMP
🔧 What is the water pump?
The water pump is responsible for circulating coolant through the engine, radiator, thermostat, and other parts of the cooling system.
Its main function is to absorb heat from the engine and carry it to the radiator, where it is dissipated into the air.
⚙️ How does it work?
-
When the engine starts, the pump begins to turn because it is connected:
-
To the crankshaft by an auxiliary belt, timing belt, or gears.
-
In some modern models (Euro 6), it may be electric or electronically assisted.
-
-
The pump draws in coolant from the bottom of the radiator or the engine block.
-
It pumps it through the:
-
Cylinder head and engine block → absorb heat.
-
Thermostat (regulates flow according to temperature).
-
Radiator → where it is cooled by the air.
-
-
The coolant returns to the engine, and the cycle repeats continuously.
📍 Location
-
Usually at the front of the engine, on the block or cylinder head.
-
It is often housed together with the thermostat.
-
In engines such as the IVECO F1C, Cursor 9, Cursor 13, NEF, it is driven by a belt or gears.
🔁 Pump types
| Type | Features |
|---|---|
| Mechanical (most common) | Belt- or gear-driven. Simple and robust. |
| Electronic (some Euro 6 models) | Controlled by the ECU according to temperature or engine load. |
| With viscous clutch (rare) | Adjusts its operation to improve energy efficiency. |
📈 Flow rate and performance
-
It can move between 60 and 150 liters per minute.
-
It operates continuously, although its operation is regulated by the thermostat and radiator fan.
🚨 Signs of water pump failure
-
Engine overheating.
-
Coolant leaks near the pump (worn seal or gasket).
-
Metallic noise or squealing (damaged bearing).
-
Low pressure in the cooling system.
-
Temperature warning light on or automatic power reduction.
🛠️ Basic diagnostics
-
Visual inspection:
-
Leaks from the pump's drain hole.
-
Play or noise in the pulley.
-
-
Flow or circulation test:
-
With the engine cold, start it and check whether the coolant is circulating (by carefully opening the cap or using clear hoses).
-
-
Diagnostics:
-
Read the coolant temperature with a scan tool.
-
Check the operation of the fan, thermostat, and ECT sensor.
-
🧠 Practical tips
-
Replace the water pump when changing the timing belt, if it is belt-driven.
-
Use IVECO-specific antifreeze (Paraflu or equivalent), never water alone.
-
Do not let it run with small leaks, because when pressure is lost, the coolant boils sooner.
🔧 In summary:
-
A key component for preventing overheating.
-
Driven mechanically or electronically.
-
If in poor condition, it can cause serious damage to the cylinder head, turbo, or entire engine.
Couldn't load pickup availability
Don't miss out on this limited-time offer designed for you
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

